How to clean an iron with vinegar: inside and outside

On irons with a steam generation function, plaque often appears due to poor-quality water. This not only reduces the efficiency of ironing, but can lead to damage to the appliance and damage to things. Experienced housewives know a universal method for solving the problem - to clean the iron from scale with vinegar.

Can I clean an iron with vinegar

Limescale accumulated in the appliance can be removed using various acids. The most sparing of them was vinegar. It eats away scale particles, so they flake off from the surface of the platform and can be easily removed with water. Most irons can be cleaned with table vinegar. At the same time, it is important to know the processing features in order to clean the household appliance without fear of harming it.

How to clean an iron with vinegar

You can clean the iron at home with vinegar both from the inside and outside, since scale forms not only in the water tank, but also on the main work surface. Limescale particles remain both in the nose of the iron (the hole where water splashes out) and in the sole where steam comes out.

How to descale an iron with vinegar inside

Regular tap water contains many different impurities that turn into scale when the appliance heats up. The formed lime can remain on the fabric, which leads to damage to things.

Ordinary vinegar will help to remove scale. It is enough to follow the instructions, not forgetting about safety precautions.

Procedure steps:

1. Add 100 ml of vinegar essence to a glass of water (you can not dilute ordinary vinegar).
2. Pour the resulting solution into the iron.
3. Switch on the device and heat up to the maximum temperature.
4. Activate steam generation mode.
5. Wait until the moisture has completely boiled away.
6. Then pour clean boiled water into the iron and sprinkle it completely. If the device does not have the function of spraying liquid, then it is necessary to use a steam generator.
7. Dry the soleplate by wiping it with a dry cloth.

If the result is unsatisfactory, the procedure should be slightly changed. There is a very effective method to descale the iron using an additional component - citric acid:

1. Pour purified water into a saucepan - 1 tbsp.
2. Add 1 tbsp. l. vinegar and a packet of lemon.
3. Boil everything.
4. Fill the iron with the resulting solution for 2 - 3 hours.
5. Drain the water or turn on the steam mode.

After the procedure, all that remains is to dry the sole and place the device vertically, with the nose up. The platform can be cleaned again if necessary.

How to clean an iron outside with vinegar

The deposits that form on the soleplate of the appliance are scale that is left by evaporated water. If the contamination is not cleaned in time, then you can ruin not only things during ironing, but also the household appliance itself. To prevent this from happening, it is necessary to clean it with vinegar at the first detection of scale on the working sole of the iron.

The procedure is easy to perform and does not take much time. At the same time, the risk of spoiling the electrical appliance is minimal.Teflon and aluminum surfaces can be cleaned with vinegar if cleaning recommendations and safety precautions are followed.

Descaling the working platform:

1. Switch on the appliance and heat it up to maximum temperature.
2. Disconnect the power supply.
3. Pour some 9% vinegar into a bowl.
4. Moisten a rag in it (the fabric should be cotton).
5. Wipe the soleplate of the iron by repeating the procedure several times.
6. Rinse the holes on the platform with cotton swabs dipped in the cleaning agent.
7. Heat the appliance again.
8. Iron on a clean cloth to remove limescale deposits.

Another option is to iron a cloth dipped in vinegar. In this case, you will have to lower the rags several times into a container with liquid.

For heavy lime deposits, you can use another, more effective method:

1. Mix 1 tbsp. l. soda with a little vinegar to make a gruel.
2. Heat the iron to keep the soleplate warm.
3. Using a cotton pad, apply the resulting mixture to the working surface of the appliance.
4. Gently spread the gruel, removing scale from the platform.
5. Remove baking soda and wipe the surface with a damp sponge.
6. Dry.

Many housewives advise using a very strong tool that will help to remove not only scale, but also particles of melted fibers.

In order to clean the burned-in fabric from the iron with vinegar, you must:

1. Heat the device to the maximum temperature.
2. Rub the working surface with a hydroperite tablet.
3. Soak a piece of cloth with vinegar.
4. Iron the rags.
5. If necessary, clean the platform again until the scale and burnt fibers are completely removed.

Prevention of scale and carbon deposits on the iron

If you use the vinegar for descaling in the iron regularly, then there will be no problems with the formation of lime deposits. Therefore, experienced housewives advise using this method regularly - at least once a month. It is worth taking into account a number of recommendations that will help avoid the appearance of scale inside the appliance and on its sole:

1. Water for filling a special tank must be purified: you can use boiled, settled, filtered.
2. After the things have been ironed, the liquid must be drained. This will prevent water from settling inside the tank, thereby leaving lime particles in it.
3. The sole of the appliance must be wiped every time so that after ironing and using the steamer, even a small amount of water and burnt fluff does not remain on it.
4. It is not necessary to turn on the temperature regulator to the highest point unnecessarily. It must correspond to the type of laundry to be ironed. Otherwise, a thin coating of burnt-out fibers will form on the sole of the appliance. This interferes with the high-quality steam outlet from the holes, which contributes to the stagnation of moisture in them.

Conclusion

It is quite easy to descale your iron with vinegar. Moreover, most models of the device will not be affected by the use of the product, since it does not contain abrasive particles. It is important to remember that the iron platform and the steam generated by heating can cause severe burns. Therefore, the procedure must be carried out as carefully as possible.