How to sew jeans at the waist with your own hands: step by step instructions

Sewing jeans at the waist so that the repair site looks neat and inconspicuous is possible if the trousers are too large or the model you like in the store sits well on the hips, but does not fit in the belt. This is especially the case with women whose waistline is narrower. It is not difficult to put the belt "in place" if the difference is no more than two sizes.

Can jeans be sewn at the waist

If the store liked trousers that are 1 - 2 sizes larger than necessary, this is not a reason to refuse a purchase. After all, the width of jeans at the waist can be reduced if you use a number of recommendations. In this case, it is not necessary to have the skills of a professional seamstress and resort to the services of a tailor shop.

What to do if jeans at the waist are large

To sew jeans at the waist, you can look after a few life hacks for yourself. But before starting work, it is important to understand how much smaller the product should be. To do this, you can use the table, which indicates the values ​​in centimeters. In addition, determining how much excess fabric in the waist will need to be removed is easy and using a regular centimeter ruler. The main thing to remember: so that the finished thing does not become cramped, you need to leave a few centimeters for allowances.

The easiest way is when you need to sew jeans in the waist for 1 - 2 sizes. If you have to remove 3 or more, then the product will have to be cut again. In this case, before starting work, it is worth assessing your own capabilities, since you cannot do without sewing skills. The needlewoman will have to reduce trousers not only in the waist area, but also on the hips and groin.

The first thing you need to do is to “dissolve” the thing as carefully as possible with a blade or a special ripper. To do this, the belt is stripped off at the back, then the seams of the seat and the step seams, reaching the hip line. The next step is to clean the threads around the edges and iron the product.

Then you can begin to outline the following points, which are fixed along the width of the back:

1. Belts, taking into account the measurement of the waist.
2. Along the hips.
3. On a stepping line.

The resulting points need to be connected with a line that can be drawn with chalk or a piece of soap. Place temporary stitches along the marked area. Fitting. If no flaws are found, you can grind jeans along all cuts.

The final step is to sew in the belt by straightening and stitching it to the resulting edge, which is located at the seam of the seat.

How to shrink jeans at the waist

There are several ways to discreetly sew jeans at the waist. Among them are the following:

1. Sewing the middle seam.
2. Decrease from the sides.
3. Adding darts.
4. Lightning application.
5. Using an elastic band.

Moreover, each needlewoman can choose the most suitable option for herself, which will also depend on the model of the product. For example, the way to sew jeans on the sides is not suitable for items with pockets.

How to sew jeans at the waist with an elastic band

To narrow the belt on jeans with your own hands, you need to stock up on some items:

• an elastic band, the optimal width of which is 1 - 2 cm, but it is best to focus on the width of the belt (the length depends on how many centimeters you need to reduce the product);
• ripper or blade;
• pin.

How to sew pants at the waist:

1. Cut the elastic to the required length.
2. Attach it to the inside of the jeans, about the center of the back.
3. With a seperator, make two cuts, stepping back a few cm from the edges of the elastic. It is necessary to ensure that in finished form it pulls off the top of the product.
4. Attach a pin to one end of the elastic.
5. Pass it inside the incision and remove it from the other side.
   
6. Secure the elastic at the sides with temporary stitches or pins so that it gathers the fabric into an accordion, but does not slip off any edge.
7. Sew on the tips. It is best to use a sewing machine, although the manual method is also acceptable if you are confident that the attachment points can be made fairly strong.
   

Some jeans are best sewn on the sides. In this case, the elastic must be applied on both sides, completely repeating the previous algorithm of actions. In this case, it is extremely important to observe proportionality: the tightening at the waist should be performed in parallel.

How to sew jeans in a waistband along the back seam

Another method that will allow you to sew jeans in a belt with your own hands involves working with the back seam, following step by step instructions.

In order to sew pants at the waist, you need the following items:

• scissors;
• centimeter;
• needle;
• threads;
• pins;
• a crayon or bar of soap;
• ripper;
• sewing machine;
• iron.

How beautiful to sew jeans in the belt:

1. Try on trousers turned inside out.
2. Make a fold along the back seam to the required width of the product.
   
3. Pin it with pins.
4. Take off your pants.
5. Draw lines on the seamy side, repeating the folds that were pinned.
   
6. Remove the mount.
7. Sew the lines with a temporary seam with contrasting threads.
8. Unscrew the belt loops if they interfere with sewing.
9. Fold the jeans over the crease so that the seam is in the center of the fold.
10. Measure the resulting width and note the value.
    
11. Measure the resulting value from the folded basting on both sides and lay the lines with contrasting threads.
12. Between the last outlined lines, rip off the belt, grabbing 2 cm along the edges.
13. Fold the product along the fold line.
14. Cut the belt in the center.
    
15. Pin the future seam line.
    
16. Sew along the marked line of folds with a typewriter and process the seam.
    
17. Then bring the product closer to the original, delaying the seam with one or two lines.
    
18. Fold and split the cut pieces of the belt.
    
19. Sew and iron them.
    
20. Put the belt on the product and pin it with a pin.
    
    
21. Stitch off and smooth again. If the belt loop has been cut off, then it is necessary to return it to its original place.
    

In this way, you can sew not only women's but also men's jeans at the waist, which turned out to be wide at the top.

How to shrink jeans at the waist using darts

The simplest method for stitching and fitting jeans exactly to your figure and waist is to use darts.

To narrow your jeans at the waist, you will need to follow these steps:

1. Try on pants.
2. Use pins to mark the places where the darts will be almost invisible. Most often they are done in the buttocks area.
   
3. Measure out the number of centimeters that can be removed.
4. In place of the marked grooves, rip off the belt, making peculiar cuts of several cm.
5. Sweep the grooves.
6. Try on the product again.
7. In the absence of flaws, you can grind darts by using a machine or manually.
8. Carefully cut off the extra centimeters at the waist. Finish the edges and grind off the cuts.
   

If you sew jeans at the waist with a thread and a needle by hand, you must make sure that the undercuts are strong and do not creep with the slightest effort.

How to shrink jeans at the waist with a back zip

You can reduce the belt on jeans, and at the same time sew the product in the gluteal zone by replacing the back seam with a zipper. In this case, you need to stock up on the following items:

• blade or ripper;
• threads for basting;
• a zipper that matches the length of the seam and the height of the belt;
• threads for the final sewing of the product;
• chalk or soap;
• sewing machine;
• needle;
• pins.

How to sew jeans with a zipper:

1. Measure the product and determine the amount of cm you need to get rid of.
2. Secure the fold with pins.
3. Remove jeans and draw lines along the fasteners along which the zipper should be sewn.
4. Unscrew the back seam, cut the belt in the center.
5. Roll up the edges at the back.
6. Sew them with contrasting thread.
7. Attach zipper.
8. Secure it with pins and try on jeans.
9. Remove the zipper.
10. Sew on folded edges, grabbing portions of the waistband. If the fold is too large, then some of the fabric can be cut off.
11. Reattach the zipper and topstitch.

To visualize how to correctly and easily sew jeans at the waist, you can watch the video:

How to sew jeans in a belt without a typewriter

Many housewives know one little secret that allows you to temporarily reduce the size of the product. The jeans can be simply washed to make them one size smaller. At the same time, work can be carried out both manually and using an automatic machine.

The first option, which will allow you to narrow the waist area on the product:

1. Pour boiling water into a suitable container.
2. Put your jeans in there.
3. Withstand 15 minutes.
4. Pour cold water into the second container.
5. After the hot soaking time has elapsed, transfer the product to the "cold bath" and let stand for about 3 minutes.
6. Squeeze out, dry.
7. Iron using the steaming function.

Washing the product by hand will allow you to reduce the waistband on jeans, even for those who are only a little unfamiliar with the rules of sewing and cutting.

The second option for reducing the size of the product at the waist:

1. Immerse jeans, which are large at the waist, into the drum of the washing machine.
2. Turn on the highest possible temperature, usually 95 ° C.
3. Disable rinse mode.
4. After spinning, take out the trousers.
5. Dry when exposed to high temperatures (you can hang the product on the battery).
6. Iron.

Useful Tips

Applying life hacks that will help to sew jeans in a belt, it is important to take into account the rules for high-quality processing of the product:

1. Jeans that need to be sewn in at the waist should be washed at least once to avoid shrinkage after rework.
2. Fitting should be done several times. This will allow you to more accurately achieve the desired size.
3. To sew on your favorite wardrobe item, you can use a template in the form of old, narrower pants.
4. It is worth avoiding completely ripping apart the legs, since it is almost impossible to sew the crotch area on your own at home.
5. The threads must be strong so that tapered jeans do not come apart at the most inopportune moment.
6. The edges of the cuts must be carefully processed with an overlock or by hand overcasting.

Conclusion

You can sew jeans at the waist in various ways, from which each needlewoman will choose the best option for herself. It is important to consider the style of the product, the availability of tools and equipment, as well as sewing skills.