DIY fly trap: how to do it at home

Flies are not just annoying insects, they are carriers of dangerous infections. In the warm season, they get inside when opening doors, through windows and vents. A fly trap from a plastic bottle, tin or glass can, as well as self-made devices under tension and sticky tapes, will help to combat them.

Features of homemade fly traps

Homemade gadgets show good results when used to kill flies. Insects begin to besiege humans during the hot summer months, especially in July and August, when new offspring appear.

Traps fight the infestation of flies. A feature of homemade devices is the attraction of insects by smell. The flies come to the appetizing aroma, but they cannot fly away and die of hunger.

A homemade flycatcher does not require special expensive parts. You can invent it from simple tools that are often sent to the trash. Some items will need to be purchased, but their cost is negligible compared to purchased flycatchers.

A self-made invention is the best option, because it immediately kills several hundred pests, does not require physical activity, works silently and does not harm the human body, unlike chemicals and poisons.

Warnings:

1. When disinfecting, use agents that are safe for people.
2. If you spot wasps or other insects, buy a spray and spray on the trap before approaching it.
3. Place homemade models away from flowers and dining tables.

How to make a flytrap with your own hands

Homemade traps are a great alternative to industrial devices. It will take a minimum of time and tools to fight insects. Traps are made quickly.

The advantage of such devices is that they do not contain chemicals and do not pose a serious threat to human health.

How to make a flytrap from a plastic bottle with your own hands

For manufacturing, you will need a plastic bottle or eggplant, scissors, a knife, sugar, honey or banana, dry yeast, water.

Step-by-step instruction:

1. Divide the bottle into 3 parts. Cut off the top.
2. Pour sugar at the bottom so that it completely covers all the bumps.
3. Add water, honey and yeast. Mix. If using banana, but cut into small pieces or mash with a fork. The mass should be homogeneous. The bait is rotten fruit, a piece of meat with a smell, or other product that produces a strong aroma.
4. Place the top of the bottle with the neck down, after removing the cap.

In about a week, the bottle flytrap will be filled with insects

Do not shake flies out of the trap, discard the plastic bottle. Make another trap. No need to try to knock out insects. They stuck to the walls and sugar, and even more so to tear them off by hand, this is not hygienic.

How to make a flytrap with your own hands can be seen in the following video:

How to DIY a glass jar fly trap

To make a flycatcher, you need a glass jar and a funnel of a suitable size. The latter can be made from a plastic bottle.

Place nuts or peanut butter in the bottom of the glass jar. Apple cider vinegar, to which dishwashing detergent is added, attracts well flies. Otherwise, insects can drink it while standing on the surface of the liquid. Overripe fruits, which begin to rot and ferment, work great.

Then a funnel is inserted inside, which should be fixed. There should be no gaps between it and the walls of the glass jar.

Around the circumference, you can wrap with tape or electrical tape

The second option is to finish making an effective fly trap using cling film. Wrap the neck tightly around it. The film should hold, not slip. Can be secured with a rubber band or wrapped around with tape.

Make a few holes in the middle of the film so that the flies can fly in. They will not be able to fly outward, since it will not be possible to find the holes. In addition, the flies will not want to leave the container.

When the trap is full of enough insects, it should be taken to the bathroom. Turn on hot water in the sink, close the drain hole and the holes in the film. When there is enough water, put a jar in it and leave for 10 minutes. The flies will die from the hot temperature. The rest can be drowned.

Throw away the flies with the contents of the glass jar. To make a new trap, the jar will have to be disinfected or treated with safe chemicals.

How to DIY a fly trap from a metal can

Any tall metal can is suitable for a homemade device. For example, from soda, stew, dog food. Scotch tape or any sticky tape will do. You can take double-sided tape.

Step-by-step instructions for making a trap:

1. Wrap a metal can with adhesive tape. If using scotch tape, wrap it up with the sticky side down without touching it. Otherwise, you won't be able to make a fly trap.
2. Rub the tape around the entire circumference with your fingers so that it adheres well to the metal.
3. Remove the adhesive tape. If the surface of the metal can does not stick well, repeat the procedure.
4. A sweet bait will help attract flies to the trap. The top is covered with cling film, as is the case with a glass jar. Make a hole.

The flies will fly on the smell and stay inside, some of the insects will stick to the outer walls.

When enough fruit flies have gathered outside and inside, the trap is disposed of, it cannot be reused.

A glass trap is made in the same way. It is placed on a flat surface, and jam is put inside. For large individuals, this trap model will not work.

How to make an electrofire trap with your own hands

A homemade automatic fly trap is not as effective at repelling insects as other devices, but is more environmentally friendly. How it works - The light from an incandescent lamp lures flies, which they can reach through a wire mesh connected to a high voltage. A flytrap stun gun with its own hands exposes an insect to an electric discharge, as a result of which it dies.

You will need to buy the following elements - a regulator for adjusting the required voltage (a dimer is suitable), an automobile ignition coil or another, a double grid and a lamp for attracting.

The ignition coil without assistance will not be able to generate the high voltage that it could; beams of current no more than 14 watts are fed to its input. To do this, you need a thyristor voltage regulator, which cuts off some part of each half-cycle of the alternating current, the pulse duration becomes less or longer. The frequency remains the same.

Plugs in from 220 W socket

The design of the thyristor regulator will not allow direct connection to the ignition coil, because it can vary the voltage from about 220 W and above, this is too much for the ignition coil. For this, a capacitor is connected in series with the regulator.

Further, the voltage goes to the common wire of the ignition coil - B, and the left terminal marked with the letter K. High voltage is removed from the common wire and from the central high-voltage output. The wires are fed to the mesh.

By adjusting the voltage of the variable resistor, the moment is selected at which the spark does not begin to slip between the grids. Shocks even without a visible arc.

To build the mesh, you will need 2 pieces of chipboard, in which you will need to drill 4 holes in the corners and punch studs with a diameter of 6 mm through the pieces of chipboard. The wire is wound in a circle around the perimeter of the entire structure. Then drill 4 more holes, but at a distance closer to the edge.

Use the wire without insulation. Inside the chipboard, make a hole for the lamp so that it passes freely through it.

How to DIY a sticky fly trap

The main thing in the flycatcher is a sticky and viscous substance that will not allow the insect to escape to freedom. To prepare a fly trap, you will need rosin, castor oil, a thin soft cloth and two sushi sticks, a metal container for boiling the mixture, and a mini-burner. Any oil can be used, but then the Velcro will have to be changed more often.

Process:

1. Put rosin (2 parts) in a container, place on a mini-burner. When the mixture boils, hold for a minute.
2. Add oil (1 part), then heat for 60 seconds.
3. Leave the mixture to cool. After 20 minutes, it will thicken if the proportions are right.
4. Slip the material between the stapled sushi sticks. Wrap the strip several times to fix the fabric.
5. Apply the prepared glue evenly to the material.
6. Twist the cloth with chopsticks to smear the back as well. If surplus appears at the edges, remove.

It is necessary to change the trap when there is no free space on the adhesive tape, or new flies are able to free themselves

Hang the finished Velcro in the place of local accumulation of flies. Attach the trap to a clothespin or attach it to the ceiling with a button.

How to DIY an Australian Flycatcher

This is the best trap for flies, falling into which they die from dehydration. The Australian homemade device is the most high-tech solution without the use of chemicals.

Step-by-step instructions for making a trap:

1. Take a timber of the required size. The optimal one is 40 by 40 mm.
2. Make grooves for installing the mesh. Set the saw depth to 12 mm, clamp the bar and make cuts. Repeat the process on the other face, so that they are at an angle of 90 ° C. Connect the frame so that the homemade trap has legs.
3. Make a pyramidal bottom. Give the process maximum attention. Cut the mesh into 4 triangles, turn the model over and screw them to the beams so that the pyramid is inside the body.
4. Make a hole at the top so that the flies can enter, but cannot escape. Close the rest of the sides with a dense mesh. Make the top of the box a lid so that it closes tightly.
5. Put the bait inside.

You can set the trap on your lawn or in your home. It is recommended to make the bait yourself or buy it at a household goods store.

A huge number of flies will gather in the trap in a week.

How to DIY a Window Fly Trap

Such a device is made like an adhesive tape. Only the glue is applied to one side of the fabric. With the sticky part, the glue window fly trap is turned away from the window. You can attach the fabric with a hot gun or use buttons for old frames.

For the second method of making a window fly trap, you will need cardboard packaging or a rectangular-type metal container. The width should match the corner of the window.

Cut the container at an angle, leave the partition at the bottom. Treat the inner part with adhesive.

Caught insects remain inside, the product should be changed as flies stick

How to make your own outdoor fly trap

In the summertime, it is impossible to sit outside on a warm evening. The flies literally gather in a swarm and bite. They fly into the light. For outdoor use, you can make a trap from a plastic bottle with sunflower oil or other bait.

Cut the top of the container along the edge, put something inside that will attract flies. Use a sharp object to make two holes on the sides of the neck, thread the rope. Remove the lid, insert the top into the lower part of the plastic bottle, secure the structure with tape or electrical tape. Hang your homemade trap under the lamp.

Street trap options

You can put the product near your home, next to an outdoor toilet, chicken coop or barn. If natural baits are used, they are placed near the resting place.

How to DIY a Fly Trap with an UV Flashlight

A more complex device with an ultraviolet flashlight attracts insects better. For manufacturing, you will need a tin can, scotch tape or electrical tape.

Wash the jar and dry it in the sun so that the glue remains on the outer surface. Glue the adhesive tape on the outer surface, put in a warm place for an hour. Glue the flashlight inside with hot glue. Remove the tape. Turn on the flashlight.

The light will attract flies, which on the way to it will stick to the sticky side of the can, this design works more efficiently at night

The second way to make a homemade trap with an ultraviolet flashlight:

1. Take a plastic container with a tight-fitting lid.
2. Make a hole in the bottom. Skip the fabric, tie a knot so that it does not go through the hole. The fabric on the other side will be attached to the ceiling with a button.
3. Make many holes in the container. Glue the plastic jar with tape, leave for a while. Remove the adhesive tape, the glue should remain on the surface.
4. Put an ultraviolet flashlight inside, turn it on. The light will pass through many holes, attracting flies, which, trying to crawl through the small holes, will stick to the surface of the container.

How to improve the effectiveness of traps

The likelihood of insect extinction quickly increases with several types of traps. To catch more flies, it is recommended that you make some homemade gadgets and place them at different ends of the apartment or garden.

The efficiency of crafts will be higher if you remove all food in the apartment, take out the trash. All food should be refrigerated. Especially berries.

Dionaeus flower will help to increase the effectiveness of traps. It is not whimsical to care for, it can be planted in the garden near the resting place or kept in the house. This is a predator flower, it eats insects.

Conclusion

A plastic bottle fly trap is the simplest, it can be quickly made.At the same time, in terms of efficiency, it is not inferior to the devices of industrial production. All proposed models of traps can be used in the fight against other insects - wasps, hornets, mosquitoes.

Fly trap reviews