How to get fat off paper

Often, the desire to combine a quick snack with the study of important documents or, without being distracted from work, can lead to rather sad consequences. This is due to the fact that it becomes necessary to remove the greasy stain from the paper. It is important to understand that it is quite difficult to remove a greasy stain from the surface of the paper without damaging it. It is undoubtedly difficult, but possible. In this case, it is recommended to use the means at hand. Thanks to the large selection, everyone will be able to choose exactly the option that best suits a particular paper.

Is it possible to remove a greasy stain from paper

To remove greasy stains from paper, you can use a large number of improvised tools that everyone has in the house. In this case, it is important to understand that the chosen method completely depends on the density - this is what should be considered in the first place. For thin paper, it is not recommended to use aggressive agents, as there is a high probability of causing even more damage to documents.

How to remove a greasy stain from a sheet of paper using folk methods

Today, there are a large number of ways that allow you to effectively remove greasy stains from a sheet of any density. It is not necessary to use special means for this, it is enough to use folk methods. Since each method is individual, you should initially familiarize yourself with all the nuances.

How to get rid of a grease stain on paper with a blotter

As everyone knows, a blotter is designed to fight blots, and it can also remove greasy stains. A step-by-step algorithm for removing greasy spots is as follows:

1. A blotter should be put on the contaminated area so that it covers the entire stain.
2. After that, you need to gently iron the sheet of paper with a warm iron.
3. Since the stain will be absorbed, it is necessary to periodically change the blotter. Do this until the stain disappears.

If a greasy mark is left on the printed or written text, then the iron should not be heated too much.

How to remove a greasy stain from a document with starch

To remove a greasy stain from a passport, you should use potato starch. This option is great for thick paper. In such situations, you can apply a small amount of starch to the problem area, then wipe it with a flannel cloth. If this method does not help, you can use another method:

1. Take peroxide and potato starch, mix the components in a ratio of 1 tsp. starch and 50 ml of colorless liquid.
2. Apply the mixture to the greasy stain using a soft brush intended for painting.
3. Leave the document in this state for 4 hours.
4. After complete drying, the formed crust is removed with a fluffy brush.

If the desired result was not achieved, then it is worth repeating the procedure again.

How to remove a greasy stain on paper with crushed chalk

If you need to remove a greasy stain without damaging the recording, then you should give preference to chalk. In this case, you will need to grind the chalk to a powder state and apply a thin layer on the dirty area of ​​the paper. After that, it is necessary to put a paper napkin or blotter over the chalk and iron it thoroughly with an iron, setting the "Synthetics" mode. If necessary, this procedure can be repeated several times.

It is important to take into account the fact that using chalk you can not be afraid that the ink will be damaged, in addition, even those notes that were left with a simple pencil will not suffer.

How to remove a greasy stain from a notebook with starch

If a greasy spot appears in the notebook, then it can be removed quite effectively using potato starch for this purpose. To obtain the desired result, you will need to prepare a special solution based on starch:

1. Take 100 ml of pure water, 1 tsp. potato starch and a container of a suitable size.
2. These components are mixed until a homogeneous mass is obtained.
3. Using a pipette, the resulting solution is applied to the problem area in the notebook.
4. After this, you must wait until the wet spot is completely dry.
5. As soon as the composition is completely dry, it is necessary to gently brush away grains of potato starch with a soft cloth.

If necessary, this procedure can be repeated several times.

How to remove a greasy stain from paper with alcohol

You can remove the stains left on the paper with rubbing alcohol. As a rule, this option is recommended for use only on dense surfaces.

The algorithm of actions is as follows:

1. A sheet of blotting paper is applied to the surface of the contaminated area and left for about 15-20 minutes. This approach will allow you to absorb fat to the maximum.
2. The remaining traces are gently wiped with a dry, clean cloth.
3. After that, you need to take a sponge, moisten it with a small amount of alcohol and carefully process the problem area on paper.

After it is possible to remove the greasy stain, the peeled sheet is inserted between several blank sheets of A4 paper and ironed with an iron.

How to remove grease from paper with salt

Salt is an equally effective option. In this case, you will need to carry out the following manipulations:

1. Sprinkle a lot of salt on the soiled area of ​​the paper.
2. Then cover with a clean sheet of paper.
3. Gently iron with an iron.

Many recommend using finely ground salt for such purposes or pre-grind it. In addition, the temperature regime of the iron should be set to a minimum, otherwise there is a possibility that the text on the paper will be smeared, which in the future cannot be displayed.

Gasoline

In some cases, gasoline can be used to remove greasy marks. It should be borne in mind that it is recommended to use gasoline mixed with magnesium or chalk to clean the paper. This is necessary primarily in order to prevent possible deformation of the paper sheet. To achieve the desired effect, it is recommended to adhere to the following step-by-step algorithm:

1. Crushed chalk is added to the enamel container.
2. In the future, the chalk must be mixed with a small amount of high quality gasoline. Ultimately, you should get a gruel and these components.
3. The resulting mixture is applied to the contaminated area and left in this form until completely dry.
4. The resulting crust should be removed as carefully as possible.

It is important to take into account that this method is only suitable for removing traces that are on a clean area, without text.

Bread crumb

Due to its porous structure, the crumb can be used to remove greasy stains from paper. To do this, it is worth performing all the work in stages, adhering to the following algorithm:

1. Take a small piece of crumb from black bread.
2. After that, you need to start gently rubbing it into the paper.
3. After a while, as the fat is absorbed, the bread crumbs will begin to separate, they should be removed immediately.

It is recommended to carry out this procedure until it is possible to completely remove the contamination.

White clay

By giving preference white cosmetic clay, you will have to perform the following step-by-step actions:

1. Take some white cosmetic clay, clean water.
2. The components are mixed together in proportions of 1: 1, in the end you should get a gruel that resembles a thick paste in consistency.
3. The resulting composition is applied to the problem area, on paper.
4. Allow some time for complete drying.

As soon as the composition is completely dry, it must be removed. For these purposes, use a soft sponge or brush.

Turpentine

As practice shows, turpentine is great for old greasy stains. The step-by-step algorithm for removing a greasy stain from thick paper is as follows:

1. The first step is to heat the turpentine, but without bringing it to a boil.
2. The substance is applied to the contaminated place using a pipette.
3. After the turpentine has been applied, cover the paper with a clean paper napkin or blotter.
4. Then they take an iron, put it on the minimum heating level and carefully iron the contaminated area.

Many people recommend heating turpentine in a water bath. As soon as bubbles begin to appear on the surface, this is a sign of readiness. It is recommended to let it cool for 30 seconds before applying the turpentine to the paper.

Useful Tips

While working, it is worth considering the following:

• fresh stains are much easier to remove;
• initially it is better to give preference to less aggressive means;
• for thick paper, you can choose any methods;
• if you choose the wrong method for thin paper, you can delete all the text.

It is important to remember that paper does not like strong moisture and mechanical stress.

Conclusion

It is quite difficult to remove a greasy stain from paper, but it is quite possible if you follow some tips and recommendations. To obtain the desired effect, it is best to perform all the work according to the attached step-by-step algorithm. In addition, it is important to understand that some methods can only be used for thick paper, which will eliminate the possibility of damaging documents.